1.Introduction
PFL vertical compound crusher is new product based on the PCL vertical compound crusher and domestic and overseas fine crushing technology.
2.Working Principle
The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.
Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.
3.Main Features
(1) The machine has special structure in the part of throw-up disc, which can improve the usage of abrasive material and reduce the cost.
(2) The wearing parts are made of anti-abrasion material (metal alloy in high hardness and toughness), so it can endure for long time.
(3) It has the advantage of high crushing ratio, large output, high efficiency, and low consumption.
(4) It is of easy operation, good performance, low noise, little vibration and good airproofing, so it is a high efficient and high level fine.
4.Technical Data
| Type |
Main shaft rotating
(r/min) |
Feeding size
(mm) |
Output size
(mm) |
Motor power
(kw) |
Capacity
(t/h) |
| PFL-800 |
1000 |
< 50 |
< 3-5 60-90% |
15-22 |
10-20 |
| PFL-1000 |
750 |
< 120 |
< 3-5 60-90% |
37-55 |
20-45 |
| PFL-1250 |
530 |
< 150 |
< 3-5 60-90% |
55-75 |
40-70 |
| PFL-1500 |
495 |
< 120 |
< 3-5 60-90% |
132 |
70-100 |
| PFL-1750 |
424 |
< 120 |
< 3-5 60-90% |
160 |
130-190 |
| PFL-2000 |
370 |
< 120 |
< 3-5 60-90% |
185 |
100-160 |
5.Our service
1) Installation and guidance
When the machine arrives at your company, we will dispatch our technicians to your company to guide the installation and commissioning at site. User should pay for the following fees air tickets, boarding and lodging and traffic in client's factory.
(2)Technical training
We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.
(3)Warranty:
Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the life-long follow-up service.
6.Our company
Gongyi Hengchang Metallurgy Building Material Equipments plant is a professional manufacturer specializing in the production of mineral beneficiation equipments, sand and stone crushing equipments, briquetting equipments, coal preparation equipments, drying and calcining equipments, cement plant equipments and compound fertilizer equipments.
Audited Supplier 
){kind=link}
){kind=link}