220V/380V Motor Manganese Gemstone Tungsten Tin Mining Copper Chrome Silver Lead Diamond Gold Mineral Processing Jig Machine

Product Description

220V/380V Motor manganese gemstone tungsten tin mining copper chrome silver lead diamond gold mineral processing jig machine

 

Product Description

 

Jig machine operating recovery rate is higher than the sine wave by the sn: 3.01%, w: 5.5%, pb: 1.63%, zn: 2.04%; water consumption reduced by 30% -40%, covers reduction by 1/3, and the stroke is adjustable.
Jig machine seperation belongs to deep groove sorting operation in ore dressing work. It adopts water as beneficiation medium, separates the minerals by use of gravity differences between the mineral ore and gangue. It is widely used in gravity separation, such as tungsten, tin, alluvial gold, hematite, limonite, manganese, titanium, antimony, lead, tantalum, niobium, etc.

Products Application
 

Because of its large processing capacity, wide range of sorting particle size, high recovery rate and good effect, it is widely used in sorting placer gold, tin, tungsten, lead, zinc, antimony, manganese, diamond, iron ore and other non-ferrous metallurgical mines and gold mining. on board.

Among these products, JT4-2 and JT1.5-2 sawtooth wave large-particle jigs can feed ore with a maximum particle size of 30MM, and use sieves to discharge ore. Applied to the beneficiation of barite ore, manganese ore, iron ore and other ores, it has the advantages of wide range of ore particle size and significantly reduced water supply under the screen.

Product Details
 

Many competitors often the thickness of the steel plate thinner, use cheaper motor, use renewable rubber, etc, to reduce the price.

Main Features
 

1.Large capacity, wide particle size range and high recovery;
2.High concentration ratio and high recovery;
3.Fabricated with highest quality material;
4.Easy to install, operate and maintain;
5.Saving water 30-40% than ordinary jig;
6.The pulsation speed very easy adjusted by regulator;
7.Suitable for roughing and desiliming.

Working Principle
 

Jig machines need water to work, and it loosens materials in vertical alternative water-flows, and it forms different layers of materials of different densities and discharges both layers from up and down discharging ports separately.

The basic composition of jigger is jigging chambers, also called jigging boxes, and there are screens in each chamber.

Water and raw ore will be fed from one end of the jigger screen, the ore granules will move in the vertical alternative water-flows. Layers will be formed because of density difference of materials.

The minerals with small density will be in the up layer and will flow together with the pulp flow while material with bigger density will be in the down layer and will discharged from the down discharging port as jigging concentrate.

Company Information:
About HENGCHANG
 

Hengchang headquarters is located in the industrial park in Gongyi City. It covers a total area of 150,000 square meters, including 100,000 square meters of standarized workshop. There are more than 200 sets of various large and medium-sized metal processing lathe, riveting machine, welding equipment and assembly equipment. We have more than 300 workers, including more than 20 middle and senior technicians. Hengchang is mainly focus on 4 series products: stone crusher machines, sand making equipment,
powder grinding mills, mineral processing equipment and their spare parts. Every year,

Hengchang can turn out 1,000 sets of crushers and 10,000 tons of crusher parts.

Customer Visit & Our Service
 

(A) Pre-sale services:

Act as a good adviser and assistant of clients, enable them to get rich and generous returns on their investments.

1.Select equipment model;
2.Design and manufacture products according to clients' special requirement;

3.Train technical personnel for clients;

4.Services during the sale;
(B)Provide considerate services to minimize clients' worries:

1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;

3.Train the first-line operators;

4.Examine the equipment;

5.Take initiative to eliminate the troubles rapidly;

6.Provide perfect service;

7.Provide technical exchanges...
(C).After-sale services:Provide considerate services to minimize clients' worries:
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4.Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;
6. Provide perfect service;
7. Provide technical exchanges.

Customer Site
 

Tantalum niobium process plant in Malaysia
we design the flowchart based on clients situation, the raw ore material through vibration feeder in to trommel scrubber, the concentrator minerals into jig separator, the tailing into sluice box. The concentrator from jig separator into shaking table.

 

100tph Tin & Coltan processing plant in Uganda
Other machines: Crusher,Vibrating screen, Jig machine, shaking table,belt conveyor etc.

Packing and delivery
 

Packaging Details:We will make different packaging according to different machine sizes standard international export packing,container, wooden box.

Delivery Time:We will customize according to the actual needs of customers. Senior designers start to design the plan. After receiving the deposit, we will complete the delivery within 15 to 25working days.

RFQ
 

Q:Why we believe in Gongyi Hengchang company?

A: 1.More than 28 years' experience.
    2.Hengchang is the leading professional supplier of solution, equipment's and service for crushing and grinding industry.
    3.Products achieved ISO9001:2000 quality management certificate and EU CE certificate.

Q:Deliver time ?
A:The lead time is 10-20 days, Delivery time will vary depending on the type of the machine, shipping method selected and part availability.

Q:Payment terms ?
A:Accepted Payment Type: T/T, L/C, Western Union, Cash and so on. After sign
the contract, pay the 10%-30% deposit of total purchase price and pay the full payment before delivery.

Q:What will you do if the machine is broken down?
A:The Products warranty is one year. We will provide the technical advice and find the solution immediately for you when the machine is in trouble. For those wear parts, we guarantee the high quality parts for long-term supply.

Q:What should i do if I want to get a best quotation?
A:If you want a suitable type for you, please let us know your material and capacity.