high recovery gravity separator Centrifugal gold concentrator
For Alluvial Gold ore
For Rock Gold Ore
Working Principle Of Centrifugal Gold Concentrator
Centrifugal gold concentrator is a relatively new type of gravity concentration apparatus. The machines utilise the principles of a centrifuge to enhance the gravitational force experienced by feed particles to effect separation based on particle density. The key components of the unit are a cone shaped "concentrate" bowl, rotated at high speed by an electric motor and a pressurized water jacket encompassing the bowl. Feed material, typically from a ball mill discharge or cyclone underflow bleed, is fed as a slurry toward the centre of the bowl from above. The feed slurry contacts the base plate of the vessel and due to its rotation, is thrust outward. The outer extremities of the concentrate bowl house a series of ribs and between each pair of ribs is a groove. During operation the lighter material flows upward over the grooves and heavy mineral particles (usually of economic value) become trapped within them. Pressurized water is injected through a series of tangential water inlets along the perimeter of each groove to maintain a fluidized bed of particles in which heavy mineral particles can be efficiently concentrated
Main Features Of Centrifugal Gold Concentrator
1) High recovery rate: Through our test, the recovery rate for placer gold can be 98% or more, for rock gold, the recovery rate could reach 97% when the feeding size is below 7mm.
2) Easy to install: Only a small leveled place required. It's a full line machine, before starting it, we only need to connect the water pump and power.
3) Easy to adjust: There are only 2 factors that will affect the recovery result, they are water pressure and feeding size. By giving proper water pressure and feeding size, you could get the best recovery effect.
4) No pollution: This machine only consumes water and electric power, and exhaust tailing and water. Low noise, no chemical agent involved.
5)Easy to operate: After finishing the water pressure and feeding size adjust, clients only need to recover the concentrates every 2-4 hours. (Depending on the grade of the mine)
Technical Parameters of Centrifugal Gold Concentrator
| Capacity (T/H) |
0.2-0.3 |
2-3 |
10-15 |
35-45 |
60-120 |
| Particle size (mm) |
0-3 |
0-4 |
0-6 |
0-6 |
0-6 |
| Back wash water (T/H) |
1.5-2 |
4-6 |
10-15 |
17-25 |
40-60 |
| Output (kg/time) |
2-3 |
10-20 |
30-40 |
60-70 |
70-80 |
| Discharge cycle (H) |
1-4 |
1-4 |
1-4 |
1-4 |
1-4 |
| Power (kw) |
0.75 |
1.5 |
5.5 |
11 |
18.5 |
| Pressure water |
20 |
120 |
400 |
1200 |
1500 |
| Weight (T) |
0.25 |
0.5 |
1.2 |
1.5 |
2 |
Approximately dimension
(mm) |
790x785x790 |
1180x1140x1250 |
1970x1670x1750 |
2300x1800x2200 |
2500x2 |
Shipment
Gravity Process
Our company:
FAQ:
1 Are you a trading company or manufacturer? What is your main products?
We are a manufacturer, Our factory name is Gongyi Hengchang metallurgical building materials equipments plant. which has over 25 years of experience in this industry. Our Main products are Jaw crusher,Impact crusher,Cone crusher,Hammer crusher,Vibration feeder,Vibration screen,sand/stone washing machine,ball mill,flotation machine,Disc pelletizer, concentrator,Rotary dryer,Conveyor machine ,Briquette machine , Mixer ,Roller grinder and so on,We produce products divided into Stone prodution line and Sand-making productiong line,
Magnetic separating process ,Flotation separating process ,Gravity separating process ,Coal and mineral powder briguetting .
2 Can I visit your factory and clients' workshop? How to get to your factory?
Yes, welcome to visit our factory anytime, we can also arrange your visit in our China clients' workshop.
For getting to our factory, you can get a flight to Zhengzhou Airport. It just takes about 2 hour from Zhengzhou Airport to our factory by car.
3 What is your guarantee time and aftersale service?
--Our guarantee time is 1 years.
--EEach order machine we provide installation drawing and operation manual. If needed, engineers can be sent to your factory for installation and commissioning, training.
--Any problem in operation or others about machines, we will give solution in 12-24hours.
4 What is your payment term?
We can accept various payment terms if it is convenient for you.
5 What is your delivery time?
machine leadtime is 7 working days in standard specification, 15~20 working days if customized.
Pls tell your questions,Hengchang factory team are happy to serve&ready to be your business partner! If you want to know more details, please contact Winni ! Your satisfaction is our greatest pursuit.
){kind=link}
){kind=link}