China Manufacture Pressure Ball Machine for Processing Coal Dust

Product Description

1.General introduction of China Manufacture Pressure Ball Machine for Processing Coal Dust

hydraulic high pressure briquette machine is a machine using a hydraulic cylinder to generate a compressive force. It uses the hydraulic equivalent of a mechanical lever. It is widely used in metallurgical, chemical, coal and refractories industries, suitable for wet powder briquetting, which is, adding an appropriate amount of water and other adhesives. This series machine uses a unique hydraulic system, improving the briquetting rate and strength. It is suitable for many materials such as light burning magnesium, iron oxide skin, manganese alloy, sludge, gypsum, carbon, silicon carbide, copper powder, iron powder and various refractory materials.




2.Working Principle of China Manufacture Pressure Ball Machine For Processing Coal Dust

The hydraulic press depends on Pascal's principle: the pressure throughout a closed system is constant. One part of the system is a piston acting as a pump, with modest mechanical force acting on a small cross-sectional area; the other part is a piston with a larger area which generates a correspondingly large mechanical force. Only small-diameter tubing (which more easily resists pressure) is needed if the pump is separated from the press cylinder. When the pressure on the press cylinder is released (the fluid returning to a reservoir), the force created in the press is reduced to a low value (which depends on the friction of the cylinder's seals).




3.Main Features of China Manufacture Pressure Ball Machine For Processing Coal Dust

(1). Good price with CE ISO certificate.
(2). Different type:roller type,hydraulic type, high pressure type coal briquette machine
(3). Strong structure,high briquetting ratio because the briquette machine excellent design it can be the single machine or whole production line.
(4). Since the system out of the briquettes have desulfurization, reducing sulfur emissions, it is also conducive to environmental protection, the State Environmental Protection Agency emission reduction industry, civilian machinery
(5). The device is superior technical performance, compact structure, reasonable assembly process, forming rolls made of special 65Mn, 9Cr2Mo, alloy materials, long life




4.Technical Parameters of China Manufacture Pressure Ball Machine for Processing Coal Dust
 

Model	Roller Dia. (mm)	Roller Width (mm)	Motor Power (kw)	Shaft Speed (r/min)	Reducer Model	Capacity (t/h)	Roller Material
YYQ-476	476	210	22/1.5	15	ZQ500	3-6	65Mn
YYQ -476	476	260	30/1.5	15	ZQ650	4-8	9Cr2M0
YYQ -500	500	300	30/1.5	15	ZQ650	5-9	65Mn/9Cr2M0
YYQ -650	650	336	45/1.5	15	ZQ750	8-15	65Mn
YYQ -672	672	275	75/1.5	13	ZQ1000	8-15	9Cr2Mo
YYQ -750	750	400	55/1.5	13	ZQ850	15-20	65Mn

5.Our service

1) Installation and guidance
When the machine arrives at your company, we will dispatch our technicians to your company to guide the installation and commissioning at site. User should pay for the following fees air tickets, boarding and lodging and traffic in client's factory.

(2)Technical training
We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.

(3)Warranty:
Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the  life-long follow-up service.

6.our copmany

Gongyi Hengchang Metallurgy Building Material Equipments plant is a professional manufacturer specializing in the production of mineral beneficiation equipments, sand and stone crushing equipments, briquetting equipments, coal preparation equipments, drying and calcining equipments, cement plant equipments and compound fertilizer equipments.

7.FAQ

Q:Hi, are you mining machinery manufacturer?

A:Yes, we can also provide amples test, mine design, equipment manufacture, after-sale service, etc.

Q:which country have your products been exported?

A:Many country, such as India, Ethiopia and so on. And our company has agencies in Zimbabwe, Sudan and Tanzania.

Q:Can you do mineral processing test?

A:Yes, not only can do it in your country, also can back to our company

8.Contact Us

If you want to know more details, please contact me!!

Website:http://hcmining.en.made-in-china.com

Tel: [phone]

Amanda