Customization: | Available |
---|---|
Pressing Mode: | Twin-roller |
Product Shape: | Oval Shape |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Our factory
Gongyi Hengchang Metallurgy Building Material Equipments plant was established in 1992, is a professional manufacturer of complete set mineral beneficiation equipments, sand and stone crushing equipments, Briquetting equipments, coal preparation equipments, drying and calcine equipments, cement plant equipments and compound fertilizer equipments, products widely used in mineral processing, metallurgy, building materials, chemicals, electricity, petroleum, coal, transportation, fertilizer, gas industry etc.
Product advantages
1. Good price with CE ISO certificate.
2. Different type:roller type,hydraulic type, high pressure type coal briquette machine
3. Strong structure,high briquetting ratio because the briquette machine excellent design
it can be the single machine or whole production line.
4. Since the system out of the briquettes have desulfurization, reducing sulfur emissions, it is also conducive to environmental protection, the State Environmental Protection Agency emission reduction industry, civilian machinery
5. The device is superior technical performance, compact structure, reasonable assembly process, forming rolls made of special 65Mn, 9Cr2Mo, alloy materials, long life.
Operating principles
The ball press machine is driven by the main motor, through the v-belt, to the reducer, the reducer is connected to the shaft, and is transmitted to the drive shaft and then by a pair of open gears to ensure the synchronization of the two rollers (equal speed reverse) The piston of the hydraulic cylinder is pressed against the constant pressure type by the oblique iron. The hydraulic circuit and the liquid control valve and the accumulator ensure the system pressure. The material is uniformly introduced into the hopper of the molding machine through the quantitative storage device through the storage bin. The adjustment of the upper damper adjusts the material evenly into the middle of the pair of rolls, and the unit forming pressure of the compressed material of the counter-rotating reverse running is changed from small to large, and the forming pressure reaches the maximum at the center line of the pair of rolls, the material After the line, the molding pressure is rapidly reduced, so that the material enters the off-ball state and the ball is smoothly removed.
therefore, there are mainly five steps of briquetting:
briquette machine briquettes making process can be devided into the following steps: Feeding-- crushing---- mixing------ ball pressing------ drying------final product.
Feeding and crushing: Feed the material into the compound crusher, to crush the material into the very small powder.
Mixing and briquetting: To fully mixing the powder in the dual shaft mixer and add the binder into the powder. Then the fully mixed powder will be feed into the briquette machine.To press the powder into ball shape that you required.
Drying: After the briquettes come out. It contains the humidity. you have to dry the ball become it come to the practical use. we can provide you the horizontal dryer or the vertical dryer to dry the briquettes