Hydraulic high pressure briquetting machine
General introduction of hydraulic high pressure briquetting machine
A hydraulic high pressure briquetting machine is a machine using a hydraulic cylinder to generate a compressive force. It uses the hydraulic equivalent of a mechanical lever. It is widely used in metallurgical, chemical, coal and refractories industries, suitable for wet powder briquetting, which is, adding an appropriate amount of water and other adhesives. This series machine uses a unique hydraulic system, improving the briquetting rate and strength. It is suitable for many materials such as light burning magnesium, iron oxide skin, manganese alloy, sludge, gypsum, carbon, silicon carbide, copper powder, iron powder and various refractory materials.
Main features of hydraulic high pressure briquetting machine
1. Good quality roller material with 65Mn/ 9Gr2Mo
2. Unique hydraulic system
3. Suitable for wet powder
4. Firm final product
Working principle of hydraulic high pressure briquetting machine
The hydraulic press depends on Pascal's principle: The pressure throughout a closed system is constant. One part of the system is a piston acting as a pump, with modest mechanical force acting on a small cross-sectional area; The other part is a piston with a larger area which generates a correspondingly large mechanical force. Only small-diameter tubing (which more easily resists pressure) is needed if the pump is separated from the press cylinder. When the pressure on the press cylinder is released (the fluid returning to a reservoir), the force created in the press is reduced to a low value (which depends on the friction of the cylinder's seals.
How to choose a suitable briquetting machine:
1. What's the raw material?
As different materials match different machines, So pls tell us what's the raw material, is it limestone powder, coal powder or other metal powder.
2. The moisture of raw material
The moisture determines whether dryer is needed in the process.
3. The size of raw material
It should be crushed if the size is too big.
4. Capacity you need
Different capacity match different models of machine, what's more, the smaller the capacity is, the simpler the process will be.
| Model |
Roller Dia.
(mm) |
Roller Width
(mm) |
Motor Power
(kw) |
Shaft Speed
(r/min) |
Reducer Model |
Capacity (t/h) |
Roller Material |
| YYQ-476 |
476 |
210 |
22/1.5 |
15 |
ZQ500 |
3-6 |
65Mn |
| YYQ -476 |
476 |
260 |
30/1.5 |
15 |
ZQ650 |
4-8 |
9Cr2M0 |
| YYQ -500 |
500 |
300 |
30/1.5 |
15 |
ZQ650 |
5-9 |
65Mn/9Cr2M0 |
| YYQ -650 |
650 |
336 |
45/1.5 |
15 |
ZQ750 |
8-15 |
65Mn |
| YYQ -672 |
672 |
275 |
75/1.5 |
13 |
ZQ1000 |
8-15 |
9Cr2Mo |
| YYQ -750 |
750 |
400 |
55/1.5 |
13 |
ZQ850 |
15-20 |
65Mn/9Cr2Mo |
| YYQ -850 |
850 |
500 |
75/1.5 |
10 |
ZQ850 |
20-30 |
65Mn/9Cr2M0 |
| YYQ-1000 |
1000 |
650 |
110/1.5 |
10 |
ZQ1000 |
30-50 |
65Mn/9Cr2M0 |
Audited Supplier 
){kind=link}
){kind=link}