1.Introduction Of sand making project silica sand drying machine
Our oil press machine is screw press type. Screw press type oil press machinery is advanced oil processing machinery. They can be used for various raw materials, as ground nuts, soybean, rapeseed and cotton seeds, sesame, olive, sunflower, coconuts, cocoa and grass seeds.
2.Working Principle of Sand making project silica sand drying machine
1.When oil press operation prepare material enters chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under the high pressure condition in the chamber ,friction between materials and screw,between material and chamber will be created which also creates friction and relative movement among material particles,on the other hand toot diameter of the pressing screw caries larger from one end to the other ,hence,when rotating,it not only pushes particles moving forwards but turns them outwards as well,meanwhile,particle adjacent the screw will rotation along with screw's rotating.
3.The oil flows through the ring teeth falls into a foodstuff-safe steel funnel. The press cake is transported out of the press via a freely adjustable press gap. This adjustable press gap makes it possible to process many different types of seed. Whereby the press cake, that is in chip form falls out of the bottom of the machine.
4.The presses are driven by a electric motor. it is also can be driven by diesel engine for customers to reach continue working performance, where the power is not so stable.
3.Technical Parameters of Sand making project silica sand drying machine
| Mode |
ZYJ-80 |
ZYJ-100 |
ZYJ-130 |
ZYJ-160 |
| Spindle Diameter |
81mm |
101mm |
130mm |
160mm |
| Spining Speed |
47r/min |
38r/min |
37r/min |
32r/min |
| Power Source |
5.5KW(Y132M-4) |
7.5KW(132M-4) |
11KW(Y132M-4) |
15KW(Y132M-4) |
| Vacuum Pump |
0.55KW(Y801-4) |
0.75KW(Y802-4) |
0.75KW(Y802-4) |
0.80KW(Y802-4) |
| Heater |
2.2KW |
2.2KW |
2.2KW |
2.2KW |
| Capacity |
65-130Kg/h |
140-280Kg/h |
250-400Kg/h |
300-550Kg/h |
| Total Weight |
880Kg |
1250Kg |
1850Kg |
2100Kg |
| Size(mm) |
1500×1200×1750 |
1700×1300×1850 |
2000×1300×1500 |
2100×1300×160 |
4.Main Feature of Sand making project silica sand drying machine
1.Widely-used:the oil press can be used for more than 20 kinds oil crops
2.Compare with the old equipment,spiral high than2 to 3%
3.Pure oil quality:the vacuum oil filtering is used to remove residue so as to ensure the pure oil quality
and meet the standard of health quarantine.
4.Save space and labor:an area of 10-20 square meters workshop and 1 to 2 worker can meet the need of production.
5.Our service
1) Installation and guidance
When the machine arrives at your company, we will dispatch our technicians to your company to guide the installation and commissioning at site. User should pay for the following fees air tickets, boarding and lodging and traffic in client's factory.
(2)Technical training
We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.
(3)Warranty:
Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the life-long follow-up service.
6.Our company
Gongyi Hengchang Metallurgy Building Material Equipments plant was built in 1992, is a professional manufacturer specializing in the production of mineral beneficiation equipments, sand and stone crushing equipments, briquetting equipments, coal preparation equipments, drying and calcining equipments, cement plant equipments and compound fertilizer equipments. The products are widely used in mineral processing, metallurgy, building materials, chemicals, electricity, petroleum, coal, transportation, fertilizer , gas industry etc.
7.FAQ
1.Q:How to choose the suitable one?
A:Please tell us your detailed requirements by mail or online,we will recommend the suitable one
as your request.
2.Q:Why the price is just a range?
A:Because different model and qantity,the price is different,competitive price will be according to
your model and quantity.
3.Q:How can I pay?
A:We accept many payment,such as T/T,Western Union,Moneygram.......
4.Q:When I receive it after pay?
A:The normal models can be sent out within 7-10 days,please contact us to check shipping time
to your address.
5.Q:Is it will be broken during transport?
A:Please don't worry,our goods with standard export package.
6.Q:What should I do if I don't know how to use?
A:Please don't worry,manual user will be sent together,you can also contact us for technical support
7.Q:What should I do if some parts broken?
A:Please don't worry,we have 12 months warranty except wear parts.
You can also buy from us after 12 months.
Audited Supplier 
){kind=link}
){kind=link}