| Customization: | Available |
|---|---|
| Type: | Vertical Compound Crusher |
| Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Various Model Lectric Can Crusher For Getting Different Size
PFL vertical compound crusher is new product based on the PCL vertical compound crusher and domestic and overseas fine crushing technology.
2.Technical Parameters of Various Model Lectric Can Crusher For Getting Different Size
| Type | Main shaft rotating (r/min) |
Feeding size (mm) |
Output size (mm) |
Motor power (kw) |
Capacity (t/h) |
| PFL-800 | 1000 | < 50 | < 3-5 60-90% | 15-22 | 10-20 |
| PFL-1000 | 750 | < 120 | < 3-5 60-90% | 37-55 | 20-45 |
| PFL-1250 | 530 | < 150 | < 3-5 60-90% | 55-75 | 40-70 |
| PFL-1500 | 495 | < 120 | < 3-5 60-90% | 132 | 70-100 |
| PFL-1750 | 424 | < 120 | < 3-5 60-90% | 160 | 130-190 |
| PFL-2000 | 370 | < 120 | < 3-5 60-90% | 185 | 100-16 |
The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.
Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.
1) The machine has special structure in the part of throw-up disc, which can improve the usage of abrasive material and reduce the cost.
2) The wearing parts are made of anti-abrasion material (metal alloy in high hardness and toughness), so it can endure for long time.
3) It has the advantage of high crushing ratio, large output, high efficiency,and low consumption.
4) It is of easy operation, good performance, low noise, little vibration and good airproofing, so it is a high efficient and high level fine.
6.Machine Parts
){kind=link}